Ex Machina Soundworks PULSAR, Руководство пользователя

Страница: 12 / 18

SECTION 4: CONNECTIONS AND CONTROLS
1. IEC INLET
Pulsar and Quasar use auto-switching power supplies, and will automatically adapt to 110/220v
power operation. Should you ever need to replace the provided 6 foot IEC cable, please ensure
you use a properly grounded, 3-prong IEC of at least 16AWG.
​ Never use a 2-conductor power
cable or leave the ground disconnected.
2. POWER INDICATOR
A white LED indicator will illuminate when the loudspeaker is switched on and operational.
Please allow 10-15 seconds after power on for the DSP to boot up before sending audio signals
to the loudspeaker.
3. XLR INPUT
The XLR connector is a balanced analog input, with a nominal operating level of +4dbu, and a
maximum input level before clipping of +14dbu. While precise digital limiters will prevent the D/A
converters and output stages from overloading, and protect the drivers from damage, do not
overload the input stage for extended periods of time.
11