FR
EN
NL
www.ewt-france.com
www.ewt-france.com
8
• Always hold the plug when you plug in or
unplug the appliance. Never unplug it by
pulling on the power cable. Risk of electric
shock and damage.
• Switch the appliance off before unplugging it.
• Never place the equipment just below a wall
plug or junction box.
• The appliance must be stored in a dry place,
away from any sources of dampness and at a
temperature of between 15°C and 25°C.
• Never immerse the appliance in water and
never place it on water or any other liquid.
Unplug the appliance immediately if it
becomes damp or wet.
• Never use the appliance when you have wet or
damp hands.
• Do not use the appliance outdoors (it is not
designed for use in the open air).
• Do not leave the appliance switched on without
supervision.
• Do not place any objects on top of the
appliance.
• Do not sit on the appliance.
• Do not subject the appliance to heat (radiator,
oven…), to direct sunlight or dampness.
• Always use the appliance in a vertical position.
• Be careful of the potential damage that can be
caused by the appliance’s sharp edges.
• Ensure that furniture, curtains or other
combustible materials are placed more than
one (1) meter from the appliance.
• Always unplug the appliance before cleaning
it.
• WARNING: Do not cover the appliance. Do not
place any materials or clothes on the appliance
or impede the circulation of air around the
appliance.
• DO NOT BLOCK THE VENTILATION! Regularly
check that the air intakes and outlets are not
obstructed.
• Do not put any objects through the protective
fan guard (finger, pen, tool…)
• Never use the appliance if the protective fan
guards are not fitted in compliance with the
assembly instructions.
• Do not remove the protective fan guard for
cleaning.
• Do not place the air intake close to walls or
curtains (1m). Obstruction of the airflow may
reduce the appliance’s efficiency.
SPECIFICATIONS
Model
WOODAIRS
Power
60W
Number of speeds
3
Oscillation
Yes: automatic
Tilt adjustment
Yes: manual
Oscillation switch
Yes
Number of blades
4
Blade material
Metal
Grill material
Metal
Grill diameter
40cm
Removeable grill
Yes: easy to clean
Handle
Yes
Voltage
220-240V~
Frequency
50HZ
Product dimensions (LxDxH)
L45 x D41 x H125
Product weight
5.6kg
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
1. Please read these instructions carefully before using the
appliance and keep them in case of future use.
2. Make sure that the voltage of your local electricity network
corresponds to the one which appears on the appliance.
3. Before using it for the first time, remove the appliance’s
protective tabs and stickers.
ASSEMBLY
Unpack your appliance and carefully remove the packaging
around the fan.
• Place the base (15) on a flat floor then take the parts for
assembling the stand (9-14).
• Remove the fixing screw for the stand (16) which is on
the main ventilator stand (14).
•
Then insert the main ventilator stand into the hole in the
base (15) and tighten the fixing screw (16) firmly at the
bottom of the base.
• Unscrew fixing screw B (13) to adjust the fan stand to the
required height then firmly retighten fixing screw B (13).
• Unscrew fixing screw A (11), connect the motor housing
(9) to the top of the inner fan stand (12) then firmly
retighten fixing screw A (11).
•
Remove the blade centre cap (2) and the safety nut (4)
which is on the motor housing (6).
• Then firmly attach the back grill (5) to the motor housing
(9), making sure that the fan handle is pointing upwards.
• Replace and firmly tighten the back grill safety nut (4).
•
Place the blades (3) onto the motor shaft (6), replace the
blade centre cap (2) and tighten firmly.
• Attach the front grill (1) to the back grill (5), use the fixing
clip to fix it together and tighten the safety screw (17)
firmly.
For safety reasons, before switching the appliance on,
ensure that the grill has been firmly attached.
Woodair_S.indd 8
5/11/18//45 22:00
