EWS UFS8000, Руководство по эксплуатации

Страница: 80 / 130

UFS8000 Ethernet 73
Save the settings by clicking on “Save All”.
14.2.4. DHCP Lease
If the DHCP server in the modem is activated (see also § 14.1.1 “DHCP function” on page 69), a so-
called “DHCP Lease” must be created. This establishes that the modem always assigns a fixed IP
address to a particular device (in this case the control) in the local network. The IP address should be
equal to the IP address (Inside IP) that is set in the “NAPT entry”. See § 14.2.2 “IP address of the
modem (LAN)” on page 72, how to connect a PC to the modem.
Example with a Speedtouch 520i modem:
Open “Advanced” in the menu and then click on DHCP. It is subsequently indicated in the “Server
Config” window whether the DHCP server is enabled. If so, then the following steps must be
performed.
Click on “Server Leases” and an overview of the set “Leases” will be displayed. Click on “New” to
create a new “Lease”.
Enter “01” in “Client ID” then
and thereafter the MAC
address (see § 10.7
“Ethernet” on page 35) of the
control and enter the IP
address of the control in the
“Client IP Address”. Then
click on “Apply”.
The adjacent represented
overview will now be
displayed.
Save the settings by clicking on “Save All”.