Design and function
Mounting the machine
16
099-008296-EW501
23.02.2021
5.2
Mounting the machine
CAUTION
Improperly secured equipment!
Equipment, equipment combinations and accessories incorrectly fastened onto trans-
port systems can tip over during transport and cause injuries!
• Only used the original parts supplied to fasten the equipment.
• Use the systems only for transporting the machines
> see 3.2 chapter
.
• Check the fixing points before each transport and at regular intervals.
5.2.1
Fixing the welding machine
Mounting process using an example. Procedure is similar for other models as appropriate.
The position of the cross bar depends on the casing width.
