Design and function
"Insufficient wire" sensor connection
36
099-008724-EW501
08.01.2012
5.10
"Insufficient wire" sensor connection
1
2
Figure 5-7
Item Symbol Description
0
1
"Insufficient wire" sensor
A warning is issued as soon as the end of the wire (insufficient wire) is reached.
The process will not be shut down.
2 X13
"Insufficient wire" sensor connection
NOTE
The cold wire supply is monitored by the "Insufficient wire" sensor, which is fastened to
the wire drum and signals low wire supply in good time. If the wire supply is insufficient
a process warning is issued on the system interface (wire error). However, this is just a
warning; the process will not be shut down.
