Rectifying faults
Error messages
099-005341-EW501
27.01.2016
41
Error Category
Possible
cause
Remedy
a) b) c)
Error 56
(no Pha)
-
-
x
Mains phase failure
Check mains voltages
Error 59
(Unit?)
Machine incompatible
Check machine used
Legend for categories (error reset)
a) The error message will disappear once the error has been rectified.
b) The error message can be reset by pressing a key button:
Welding machine control
Key button
RC1 / RC2
Expert
CarExpert / Progress (M3.11)
alpha Q / Concept / Basic / Basic S / Synergic /
Synergic S / Progress (M3.71) / Picomig 305
not possible
c) The error message can only be reset by switching the machine off and on again.
The shielding gas error (Err 6) can be reset by pressing the "Welding parameters" key button.
