Design and function
MIG/MAG welding
099-005214-EW501
19.05.2011
39
5.7.9
Standard MIG/MAG torch
The MIG welding torch trigger is essentially used to start and stop the welding process.
Operating elements
Functions
Torch trigger
• Start/stop welding
5.7.10
MIG/MAG special-torches
Function specifications and more indepth information can be found in the operating manual for
the relevant welding torch!
The following special torches can be used together with this welding machine:
• UP/DOWN welding torch with two rocker buttons
−
for setting the wire-feed speed and
−
for setting the welding performance.
5.7.11
Remote control
Remote controls are operated on the 19-pole remote control connection socket (analogue). If required,
extension cables are available in different lengths (see chapter "Accessories").
• The remote control is detected automatically when the welding machine is switched on.
Features:
• Setting the operating point via the wire speed (single-dial operation)
• Arc length correction
