Machine description – quick overview
Machine control – Operating elements
099-004968-EW501
13.09.2021
19
4.3.1.1 Internal operating elements
The maximum possible machine configuration is given in the text description.
If necessary, the optional connection may need to be retrofitted
> see 9 chapter
.
• Unlock the right-hand cover on the machine.
• Tilt the cover forwards, then remove upwards.
There are other operating elements for parameter setting on the machine.
Figure 4-4
All details in percent relate to the values stored in the characteristics.
Item Symbol Description
0
1
Rotary dial, Wire creep (optional)
+/- 30%
2
"Gas post-flow time" trimmer
Setting range 0.2-10 s
3
Trimmer, Burn-back
+/- 50%
4
Push-button, wire inching
Currentless wire inching
4.3.1.2 Setting the operating point (welding output)
This control works according to the twin-knob operation principle. To set the operating point, only the wire
speed and the welding voltage need to be set according to the material and the electrode diameter.
Operating ele-
ment
Action
Result
Wire speed setting
Welding voltage setting
