Design and function
Establishing the connections
8
099-008808-EW501
13.01.2016
5
Design and function
5.1
Establishing the connections
CAUTION
Damage to the machine due to improper connection!
The remote controls have been developed to be connected to welding machines or wire
feed units only. Connecting them to other machines may cause damage to the
machines!
• Observe the operating instructions for the welding machine or wire feed unit!
• Switch off the welding machine before connecting!
Observe documentation of other system components when connecting!
• Switch off the welding machine.
• Insert the male connector plug (socket) into the remote control connection socket and lock by turning
to the right.
• Insert the male connector plug (pin) into the remote control connection socket of the welding machine
and lock by turning to the right.
