EWM PM 301 W Скачать руководство пользователя страница 9

Страница: 9 / 59

Intended use

Documents which also apply

099-700003-EW501

14.09.2020

3.2 Documents which also apply

3.2.1 Warranty

For more information refer to the "Warranty registration" brochure supplied and our information regarding

warranty, maintenance and testing at

www.ewm-group.com

3.2.2 Declaration of Conformity

This product corresponds in its design and construction to the EU directives listed in the decla-

ration. The product comes with a relevant declaration of conformity in the original.

The manufacturer recommends carrying out the safety inspection according to national and in-

ternational standards and guidelines every 12 months.

3.2.3 Service documents (spare parts)

WARNING

Do not carry out any unauthorised repairs or modifications!

To avoid injury and equipment damage, the unit must only be repaired or modified by

specialist, skilled persons!

The warranty becomes null and void in the event of unauthorised interference.

• Appoint only skilled persons for repair work (trained service personnel)!

Spare parts can be obtained from the relevant authorised dealer.

Содержание PM 301 W




























































Результаты поиска

Содержание PM 301 W

Отзывы:

Похожие инструкции для PM 301 W

Бренды по названию

Популярные бренды

EWM PM 301 W, Руководство по эксплуатации

Результаты поиска

Содержание PM 301 W

Отзывы:

Похожие инструкции для PM 301 W

Бренды по названию

Популярные бренды