For your safety
General
6
099-002129-EW501
15.10.2020
2.1.2 Complete documentation
These operating instructions are part of the complete documentation and valid only in
combination with the "Safety instructions”!
Read and observe the documents for all system components!
Figure 2-1
Item Documentation
A.1 Safety instructions
A.2 Power source
A.3 Electrode holder/welding torch
A.4 Remote control
A
Complete documentation
2.2 General
CAUTION
Obligations of the operator!
The respective national directives and laws must be complied with when operating the
machine!
• Implementation of national legislation relating to framework directive 89/391/EEC on the int-
roduction of measures to encourage improvements in the safety and health of workers at
work and associated individual guidelines.
• In particular, directive 89/655/EEC concerning the minimum safety and health requirements
for the use of work equipment by workers at work.
• The regulations applicable to occupational safety and accident prevention in the country
concerned.
• Setting up and operating the machine as per IEC 60974.-9.
• Brief the user on safety-conscious work practices on a regular basis.
• Regularly inspect the machine as per IEC 60974.-4.
The manufacturer's warranty becomes void if non-genuine parts are used!
• Only use system components and options (power sources, welding torches, electrode hold-
ers, remote controls, spare parts and replacement parts, etc.) from our range of products!
• Only insert and lock accessory components into the relevant connection socket when the ma-
chine is switched off.