EWM MT301W Series Скачать руководство пользователя | Manualshive

Страница: 36 / 60

background image

Maintenance, care and disposal

Maintenance work, intervals

36

099-500058-EW501

04.08.2016

6

Maintenance, care and disposal

CAUTION

Electrical current!
The following work must always be carried out with the power source switched off.

Disconnect the welding torch from the connected device, before maintenance.

6.1

Maintenance work, intervals

6.1.1

Daily maintenance tasks

• Purge the wire guide from the direction of the Euro torch connector with oil- and condensate-free

compressed air or shielding gas.

• Purge the wire guide from the direction of the Euro torch connector with oil- and condensate-free

compressed air or shielding gas.

• Check that coolant connections are tight.
• Check that the welding torch, and where applicable the power source cooling, are functioning

correctly.

• Check the coolant level.
• Check torch, hose package and power connections for exterior damage and replace or have repaired

by specialist staff as necessary!

•  Check the wearing parts in the torch.
•  Check that all connections and wearing parts are hand-tight and tighten if necessary.
•  Spray the gas nozzle with a splash protection agent.

6.1.2

Monthly maintenance tasks

• Check the coolant container for sludge deposits and check the coolant for cloudiness.

Clean the coolant container if contaminated, and change the coolant.

• If the coolant is dirty, rinse through the welding torch alternately several times with fresh coolant using

the coolant return and supply.

• Check the wire guide.
• Check and clean the welding torch. Deposits in the torch can cause short circuits and have a negative

impact on the welding result, ultimately causing damage to the torch.

• Check that all screw and plug connections and replaceable parts are secured correctly, tighten if

necessary.

Re-connect the welding torch after completing any maintenance work, use the 'gas test' function
to purge with shielding gas and vent > see 7.3 chapter.

6.2 Maintenance

work

Electric current!
Repairs may only be carried out by authorised specialist staff!

• Do not remove the torch from the hose package!
• Never clamp the torch body in a vice or similar, as this can cause the torch to be irreparably

destroyed!

• If damage occurs to the torch or to the hose package which cannot be corrected as part of the

maintenance work, the entire torch must be returned to the manufacturer

«
...
34
35
36
37
38
...
»

Содержание MT301W Series





























































Отзывы:

Нет отзывов

Похожие инструкции для MT301W Series

Бренд: GAL Страницы: 92

SET-2000 Oil/Sludge

Бренд: Labkotec Страницы: 14

Бренд: Olympia Страницы: 62

Бренд: RBH Sound Страницы: 12

Бренд: B.M.P. Страницы: 38

Бренд: OMCN Страницы: 40

Бренд: 4CR Страницы: 7

Бренд: KH SECURITY Страницы: 2

Бренд: Q-See Страницы: 9

Бренд: Ergoswiss Страницы: 27

Бренд: Caladair Страницы: 49

Бренд: BST Страницы: 30

Бренд: Abus Страницы: 2

POCKETMIG 205 DSC

Бренд: iWeld Страницы: 36

Digi-Tig250ACDC

Бренд: CARBONE Страницы: 43

Бренд: NIFTYLIFT Страницы: 46

Keychain Remote

Бренд: ADT Страницы: 7

Бренд: JBL Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды