EWM MT301W Series Скачать руководство пользователя страница 5

Страница: 5 / 60

Safety instructions

Notes on the use of these operating instructions

099-500058-EW501

04.08.2016

2 Safety

instructions

2.1

Notes on the use of these operating instructions

DANGER

Working or operating procedures which must be closely observed to prevent imminent
serious and even fatal injuries.

• Safety notes include the "DANGER" keyword in the heading with a general warning symbol.
• The hazard is also highlighted using a symbol on the edge of the page.

WARNING

Working or operating procedures which must be closely observed to prevent serious
and even fatal injuries.

• Safety notes include the "WARNING" keyword in the heading with a general warning

symbol.

• The hazard is also highlighted using a symbol in the page margin.

CAUTION

Working or operating procedures which must be closely observed to prevent possible
minor personal injury.

• The safety information includes the "CAUTION" keyword in its heading with a general

warning symbol.

• The risk is explained using a symbol on the edge of the page.

Special technical points which users must observe.

Instructions and lists detailing step-by-step actions for given situations can be recognised via bullet
points, e.g.:

• Insert the welding current lead socket into the relevant socket and lock.

Содержание MT301W Series





























































Результаты поиска

Содержание MT301W Series

Отзывы:

Похожие инструкции для MT301W Series

Бренды по названию

Популярные бренды

EWM MT301W Series, Руководство по эксплуатации

Результаты поиска

Содержание MT301W Series

Отзывы:

Похожие инструкции для MT301W Series

Бренды по названию

Популярные бренды