Product description – quick reference
Function torch
099-500050-EW501
04.08.2016
17
4.3.5
Welding data display
The signal lamps in the lower part of the torch display indicate the welding parameters currently selected.
The corresponding parameter value is shown on the three-digit display.
After the welding machine is switched on, the active JOB number is shown on the display for approx. 3
seconds. The display then switches to the setpoint value for the welding current or wire speed.
In up/down mode, the corresponding parameter value is shown on the display for parameter changes. If
this parameter is not changed for approx. 5 seconds, the display switches back to the values specified by
the machine control.
A
3
2
1
Figure 4-7
Item Symbol Description
0
1
Three-figure display
Display of welding parameters
> see 4.3.5 chapter
.
2
A
Welding current display signal lamp
3
Wire speed display signal lamp
Example displays for welding parameters in the welding data display
Welding parameters
Display
Welding current
A
Wire speed
A
Programs
A
Содержание MT221
Страница 49: ...Circuit diagrams MT 2U D 099 500050 EW501 04 08 2016 49 10 3 MT 2U D Figure 10 3...
Страница 51: ...Circuit diagrams MT PC1 099 500050 EW501 04 08 2016 51 10 5 MT PC1 Figure 10 5...
Страница 53: ...Circuit diagrams MT PC2 099 500050 EW501 04 08 2016 53 10 7 MT PC2 Figure 10 7...
Страница 55: ...Appendix A Overview of EWM branches 099 500050 EW501 04 08 2016 55 11 Appendix A 11 1 Overview of EWM branches...
