EWM MT221 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 55

background image

Safety instructions

General

099-500050-EW501

04.08.2016

7

2.2 General

WARNING

Risk of injury from electrical voltage!
Voltages can cause potentially fatal electric shocks and burns on contact. Even low
voltages can cause a shock and lead to accidents.

• Never touch live components such as welding current sockets or stick, tungsten or wire

electrodes!

•  Always place torches and electrode holders on an insulated surface!
•  Wear the full personal protective equipment (depending on the application)!
•  The machine may only be opened by qualified personnel!

Fire hazard!
Due to the high temperatures, sparks, glowing parts and hot slag that occur during
welding, there is a risk of flames.

•  Be watchful of potential sources of fire in the working area!
•  Do not carry any easily inflammable objects, e.g. matches or lighters.
•  Ensure suitable fire extinguishers are available in the working area!
•  Thoroughly remove any residue of flammable materials from the workpiece prior to starting

to weld.

• Only further process workpieces after they have cooled down. Do not allow them to contact

any flammable materials!

Risk of injury due to radiation or heat!
Arc radiation results in injury to skin and eyes.
Contact with hot workpieces and sparks results in burns.

• Use welding shield or welding helmet with the appropriate safety level (depending on the

application)!

• Wear dry protective clothing (e.g. welding shield, gloves, etc.) according to the relevant

regulations in the country in question!

• Protect persons not involved in the work against arc beams and the risk of glare using

safety curtains!

Risk of accidents due to non-compliance with the safety instructions!
Non-compliance with the safety instructions can be fatal!

•  Carefully read the safety instructions in this manual!
•  Observe the accident prevention regulations and any regional regulations!
•  Inform persons in the working area that they must comply with the regulations!

«
...
5
6
7
8
9
...
»

Содержание MT221
























































Отзывы:

Нет отзывов

Похожие инструкции для MT221

Бренд: Eaton Страницы: 32

Бренд: CAME Страницы: 104

Бренд: Zenith Страницы: 14

Бренд: R.V.R. Elettronica Страницы: 38

Бренд: D3D Страницы: 4

DBI SALA Pro Series

Бренд: 3M Страницы: 24

Бренд: Barnett Engineering Страницы: 3

Бренд: Handicare Страницы: 20

Бренд: biodex Страницы: 20

Бренд: Watts Страницы: 73

Бренд: Raychem Страницы: 6

Бренд: JBL Страницы: 16

Бренд: INNO Instrument Страницы: 45

Бренд: Aiwa Страницы: 11

Бренд: Clarke Страницы: 24

Бренд: JBL Страницы: 2

HOME ARENA MX 5.1

Бренд: TerraTec Страницы: 2

Бренд: KBSOUND Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды