EWM MT221 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 55

background image

Intended use

General

10

099-500050-EW501

04.08.2016

3 Intended

use

3.1 General

WARNING

Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!

• The equipment must only be used in line with its designated purpose and by trained or

expert personnel!

• Do not improperly modify or convert the equipment!

Welding torch for arc welding machines for GMAW.

3.2

Documents which also apply

3.2.1 Warranty

For more information refer to the "Warranty registration" brochure supplied and our information
regarding warranty, maintenance and testing at

www.ewm-group.com

3.2.2

Declaration of Conformity

The labelled machine complies with the following EC directives in terms of its design and
construction:

• Low Voltage Directive (LVD) 2014/35/EC
• Electromagnetic

Compatibility Directive (EMC) 2014/30/EC

• Restriction of Hazardous Substance (RoHS) 2011/65/EC

In case of unauthorised changes, improper repairs, non-compliance with specified deadlines for "Arc
Welding Equipment – Inspection and Testing during Operation", and/or prohibited modifications which
have not been explicitly authorised by EWM, this declaration shall be voided. An original document of the
specific declaration of conformity is included with every product.

3.2.3

Service documents (spare parts)

WARNING

Do not carry out any unauthorised repairs or modifications!
To avoid injury and equipment damage, the unit must only be repaired or modified by
specialist, skilled persons!
The warranty becomes null and void in the event of unauthorised interference.

• Appoint only skilled persons for repair work (trained service personnel)!

Spare parts can be obtained from the relevant authorised dealer.

«
...
8
9
10
11
12
...
»

Содержание MT221
























































Отзывы:

Нет отзывов

Похожие инструкции для MT221

Бренд: Oklahoma Sound Страницы: 4

Interlogix 60-875 Simon

Бренд: GE Страницы: 40

Бренд: GE Security Страницы: 2

Бренд: Caddx-Caddi Controls Страницы: 6

Бренд: Eaton Страницы: 68

Бренд: Eastwood Страницы: 16

Бренд: Eastwood Страницы: 16

Бренд: Omni Страницы: 108

Бренд: PartyFunLights Страницы: 4

Бренд: jablotron Страницы: 16

Бренд: IDS Страницы: 36

Бренд: Panasonic Страницы: 45

Бренд: Renkforce Страницы: 4

Бренд: Bose Sicilia Страницы: 24

Brauheld Pro 30

Бренд: Klarstein Страницы: 32

Бренд: Audiocenter Страницы: 40

NeverFreeze SX-0810-24

Бренд: ThermoSoft Страницы: 5

Бренд: NAPCO Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды