EWM inverter STICK 250 H-2, Руководство по эксплуатации

Страница: 12 / 29

3 Function specification
3/3
3.4 Remote control
Only the remote controls described in these operating instructions should be connected!
Plug the remote control into the remote control socket (chap. 2, H1) and lock it only when
the machine is switched off.
The remote control is detected automatically when the welding machine is switched on.
See the operating instructions for the remote control for more detailed information.
FR 21 foot- operated remote control
Functions
•
The welding current I
1
can be set to any value from the minimum to the maximum
current regardless of the welding current selected on the machine.
FR 30 manual remote control
Functions
•
The welding current I
1
can be set to any value from the minimum to the maximum
current regardless of the welding current selected on the machine.
FR 30F manual remote control
Functions
•
The welding current I
1
can be set to any value from the minimum to the maximum
current regardless of the welding current selected on the machine.
In this process, the welding current I
1
can be adjusted in 2 ranges (coarse/fine
adjustment).
Commissioning:
•
Features
•
Large adjusting knob
FR 30 PWS manual remote control
Functions
•
Pole changeover switch for changing the welding polarity.
The welding current I
1
can be set to any value from the minimum to the maximum
current regardless of the welding current selected on the machine.
Commissioning:
•
The pole changeover switch on the welding machine must be in position +.
FR 30F PWS manual remote control
Functions
•
Pole changeover switch for changing the welding polarity.
The welding current I
1
can be set to any value from the minimum to the maximum
current regardless of the welding current selected on the machine.
In this process, the welding current I
1
can be adjusted in 2 ranges (coarse/fine
adjustment).
Commissioning:
•
The pole changeover switch on the welding machine must be in po.
Features
•
Large adjusting knob, 2 setting ranges