26
CPMT
8.1 Maintenance plan
Maintenance tasks that are required for optimal and trou-
ble-free operation are described in the sections below.
If increased wear is detected during regular inspections,
shorten the required maintenance intervals according to the
actual indications of wear.
Interval
Maintenance work
To be carried out by
Daily
Clean dust and dirt from the pillar (⮑ 8.2.1 Cleaning, page 26).
Operator
Check pillar for visible damage (⮑ 8.2.4 Visual check of external condition, page 27).
Qualified personnel
Check pillar for unusal noise or change in performance
Qualified personnel
Monthly
Check the function of operating features and safety equipment.
Qualified personnel
Check the attachments of the device to the upper and lower attachment plates.
Qualified personnel
Every 6 months
Check the function of the emergency cut-off switch, if present.
Qualified electrician
Check that all plugs are properly inserted.
Operator
As determined by
the processor
Conduct visual inspection of the routing of the motor and controller cables within the
application. Cable routing elements should not be loose or broken.
Qualified electrician
NOTE
If the telescopic pillar is used outside the environmental
conditions specified earlier in this manual, check the
device once a month for any changes, such as oxidation or
sedimentation.
8.2 Maintenance work
8.2.1 Cleaning
CAUTION
Damage due to incorrect cleaning
Therefore:
• Do not use aggressive cleaning agents. Water used for cleaning,
including chemical additives, must be pH-neutral.
• No liquids are to come in contact with the telescopic pillar during
retraction or extension.
• No stream jets or pressure washers to be used for cleaning.
• The use of other cleaning agents or cleaning devices only with the
manufacturer’s approval.
Clean the device:
1. Separate the device from the energy supply
2. Clean soiled parts with a damp cloth
8.2.2 Inspections and readings
• To be performed by a professional electrician.
• To be conducted according to the applicable standards
and regulations.
• To be fully documented (⮑ Service Log).
