5
Fig.2
The battery should be fully charged before first use.
Charging your Zest
1.
Fix the handle to the main body by using the locking “screw” to secure the handle in place.
2.
Attach the motorised floor brush onto the base of the main unit/body. Ensure the locking
clip at the back of the unit is secure and the electrical connection between the unit and the
brush is made.
3.
Insert the plug of the charger into the wall socket and the other end into the charging point
(located on the bottom side of the charging base). For your safety the charging voltage must
be as described in the instruction manual.
4.
Place the Zest on the charger base, the handheld unit must be fitted into the upright
unit/body for charging to take place.
5.
When the unit is being charged, the neon light on the handheld vacuum cleaner flashes
continuously. When the indicator light stops flickering and remains lit the battery is fully
charged and the unit is ready for use.
When charging for the first time, please allow 8 hours
minimum.
Main body
Handheld unit
Handheld
unit
release
button
On/off switch 1
On/off switch 2
& indicator light
Motorised
floor brush
Charger cable/plug
Charger base plate
