Ewbank STEAM DYNAMO+ EW0018, Инструкция по эксплуатации

Страница: 8 / 16

8
HOW TO USE THE TOOLS
• The jet nozzle and the brush tool can be used to get into awkward corners that
are normally difficult to clean
• Use the brush tool to scrub and loosen stubborn dirt from hard surfaces
• Use the window/tile cleaner to clean grime from tiles and windows
• To use these tools, first fit the straight adaptor. Depress the button on top of the
handle and push the straight adaptor on
• Now you can push any of these three tools onto the tip of the straight adaptor.
Please note that these attachments slide onto the straight adaptor (do not twist)
• Attach the floor brush to the extension wands, which snap together. Then attach
the extension wand to the steam gun. Do ensure the extension wands are firmly
connected
• Before cleaning always remove dust from the surface you wish to clean
• To release the extension wands depress the button on the hose connection
CLEANING WITH CLEANING CLOTH
• While the machine is switched off attach the cleaning cloth to the floor brush via
the spring-loaded clips, Make sure the edges of the cleaning cloth are secure
• DO NOT attempt to do this while the machine is still hot
• Never remove the cleaning cloth while the safety trigger is released or the
machine is warm to the touch
HOW TO USE THE WALLPAPER STEAMER
1. Your wallpaper steamer may be supplied with the handle separate to the plate
and requiring assembly - this requires the handle to be locked into place on the
steam plate and then secured with the two screws provided
NOTE: Do not use without correctly attaching the handle
2. Now attach the fully assembled wallpaper steamer to the steam control gun
3. Before using, direct the wallpaper steamer into a bucket and press the trigger to
remove any condensation build up in the steam hose
4. It is highly recommended that you test a small area of the wall before full
commencement of the operation; this is to check that you do not have any loose
plaster, as the pressurised steam could get behind and “blow” the plaster away
from the wall
5. Faster removal of wallpaper can be achieved by scoring the wallpaper before
steaming - a crisscross pattern scored into the wallpaper to be stripped achieves
the best results
6. Place the wallpaper steamer directly against the wallpaper for around 12
seconds, and then move on to the area next to where you have just been
steaming - you should now be able to easily remove the wallpaper from the
previously steamed area with a wallpaper scraper
7. Continue working in this fashion until all the undesired wallpaper is removed;
steaming and scraping at the same time - working in a “Z” pattern is found to be
most effective, starting at the top of the wall
OPERA
TIN
G INS
TR
UCTIONS