14
CLEANING THE MAIN FILTER
The main HEPA filter and the cover should be cleaned
regularly. It is advised to clean the filter as often as
emptying the dust container. Switch off the vacuum
cleaner and disconnect the plug from the mains. When
doing this always pull using the plug and not the cable.
When the dust container has been removed from the
body, release the inner chamber.
Remove the main HEPA filter by twisting and
aligning the pins with the slots. Pull out to release.
CLEANING THE FILTER SYSTEM
Important!
Ensure that the dust container has been disconnected from the body of the
vacuum cleaner before opening the lid to access the filter system.
The filter system should be cleaned regularly. It is advised to clean the filter as
often as emptying the dust container.
Important!
The filter material is soft and fine, so clean the filter gently. Only ever wash
the filter with clean water and do not use soap or detergent; this is likely to
destroy the filter.
EMPTYING THE DUST CONTAINER
Because of the transparent design, it is easy to see when
the appliance needs to be cleaned or emptied. Switch
off the vacuum cleaner and disconnect the plug from the
mains. When doing this always pull using the plug and
not the cable. Press the release button on the top of the
dust container to release it. Take the dust container to a
waste bin and release the clip at the base. Make sure to
be over the bin when doing this.
CLEANING AND MAINTENANCE
The cyclonic vacuum cleaner is bagless. The dirt is forced up into the vacuum cleaner
by the airflow created. The air is then filtered and cleaned by its internal structure.
CLEANING THE MAIN HEPA FILTER
We suggest tapping the main HEPA filter to remove most of the debris. It too can
be cleaned with water but make sure it is totally dry before placing it back into the
appliance.
