Using your polishing head
DO NOT USE ON CARPET
-Take care not to slip over when polishing floors,
they can become very slippery in the process.
-Only use dedicated floor products, other
inappropriate detergents or types of polish could
leave the floor dangerously slippery.
-Do not leave the product operating in one area for
a prolonged period of time as this may damage
your floor surface.
Applying floor treatments
-The recommended floor treatment is Ewbank®
Floor Polish, which has been specifically developed
to complement the EPV1100. Ewbank® Floor
Polish is available from Ewbank® retail stockists,
from the Ewbank® website
www.ewbankus.com or by calling 855-439-2265.
-Always read and follow the manufacturerʼs
instructions.
-Apply the treatment directly to the floor unless
instructions indicate otherwise.
Scrubbing / cleaning the floor
-Heavily soiled surfaces may require the brush
attachments are used initially to loosen any debris.
Otherwise ensure that the white scrubbing pads
are attached (see page 4).
-Use the white scrubbing pads with floor cleaner or
Ewbank® Floor Polish to remove stubborn stains
or old treatments from the floor surface.
-Turn the product on at the power socket and
select the correct setting selected on the power
button. The default setting is off. Press down and a
light will show on the front of the unit, this means
the polisher is on and the vacuum is off. Press
down again the polisher and vacuum will be on.
-With your foot securing the head of the polisher on
the floor (1), pull the handle towards you (2) and
the product will start (Fig.9). Returning the handle
to its upright position will stop the product.
5
Fig.
9
2.
Pull back
to start
1.
Place foot
on base
Using your polishing head
DO NOT USE ON CARPET
-Take care not to slip over when polishing floors,
they can become very slippery in the process.
-Only use dedicated floor products, other
inappropriate detergents or types of polish could
leave the floor dangerously slippery.
-Do not leave the product operating in one area for
a prolonged period of time as this may damage
your floor surface.
Applying floor treatments
-The recommended floor treatment is Ewbank®
Floor Polish, which has been specifically developed
to complement the EPV1100. Ewbank® Floor
Polish is available from Ewbank® retail stockists,
from the Ewbank® website
www.ewbankus.com or by calling 855-439-2265.
-Always read and follow the manufacturerʼs
instructions.
-Apply the treatment directly to the floor unless
instructions indicate otherwise.
Scrubbing / cleaning the floor
-Heavily soiled surfaces may require the brush
attachments are used initially to loosen any debris.
Otherwise ensure that the white scrubbing pads
are attached (see page 4).
-Use the white scrubbing pads with floor cleaner or
Ewbank® Floor Polish to remove stubborn stains
or old treatments from the floor surface.
-Turn the product on at the power socket and
select the correct setting selected on the power
button. The default setting is off. Press down and a
light will show on the front of the unit, this means
the polisher is on and the vacuum is off. Press
down again the polisher and vacuum will be on.
-With your foot securing the head of the polisher on
the floor (1), pull the handle towards you (2) and
the product will start (Fig.9). Returning the handle
to its upright position will stop the product.
5
Fig.
9
2.
Pull back
to start
1.
Place foot
on base
5
