4
Assembling the Polisher
-Insert the handle's inner metal tube into the vacuum (Fig.1)
-Push plastic upper handle section onto the handle's outer
metal tube, which will lock into place by way of a metal button
(Fig.2)
Changing the pads and plates on your product
-Make sure appliance is not plugged in before fitting or
removing the pads.
-Invert the cleaning head so that the drive hubs are accessible
(Fig. 3)
-Place the required hook & loop backing plate (for pads) or
brush plate over the hub, making sure the four connectors are
aligned to the holes in the hub (Fig.4).
-Press the plated down to clip into place.
-Always use two plates of the same type, i.e. not 1 brush and 1
pad (Fig.5).
-Simply pull the plates/brushes off to remove and change.
-Adjust the height of the handle
White / blue / yellow pads can be applied directly to the
backing plates and peeled off to remove (Fig.6)
For additional stability the pro-grip handle can be opened
to enable two-handed use. Press the button above the grip
(Fig.7) and open the handle (Fig.8)
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
4
Assembling the Polisher
-Insert the handle's inner metal tube into the vacuum (Fig.1)
-Push plastic upper handle section onto the handle's outer
metal tube, which will lock into place by way of a metal button
(Fig.2)
Changing the pads and plates on your product
-Make sure appliance is not plugged in before fitting or
removing the pads.
-Invert the cleaning head so that the drive hubs are accessible
(Fig. 3)
-Place the required hook & loop backing plate (for pads) or
brush plate over the hub, making sure the four connectors are
aligned to the holes in the hub (Fig.4).
-Press the plated down to clip into place.
-Always use two plates of the same type, i.e. not 1 brush and 1
pad (Fig.5).
-Simply pull the plates/brushes off to remove and change.
-Adjust the height of the handle
White / blue / yellow pads can be applied directly to the
backing plates and peeled off to remove (Fig.6)
For additional stability the pro-grip handle can be opened
to enable two-handed use. Press the button above the grip
(Fig.7) and open the handle (Fig.8)
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
4