State of the Art EVSE
User Manual
Model 3727-A02XX EVSE Gateway
Copyright EVSE LLC 2017. All rights reserved. Patents pending.
Page 19
Replacing a ZigBee Mesh Gateway Module
In the event that you need to replace a Gateway Module, install it as discussed in the 3727 series of Installation Sheets. After
installation, perform the following steps to synch it back up with the existing ZigBee Mesh Network of EVSEs. It is assumed
you have logged into the browser. See Logging In on page 15 for more information.
1.
Make sure the power is on to all the EVSEs in this Gateway Module’s network.
2.
Choose an EVSE closest to this Gateway Module. Refer to that EVSE’s installation guide for cover removal
instructions and remove its cover.
3.
Slide that EVSE’s Data Router Dip Switch number 3 to Closed to put it into ZigBee Setup Mode (Figure 5). After a few
moments, all the lights on the Data Router will begin flashing, letting you know the EVSE is now in ZigBee Setup
Mode (Figure 6).
4.
From the main Web browser screen, select the ZigBee Setup dropdown menu and click Synch Payment Station. The
following screen displays:
5.
The Gateway Module can now find all the EVSEs associated with its network. These EVSEs begin displaying their
ZigBee Module numbers in the blank area of this screen. Once they have all displayed, Close Switch 3 on the EVSE’s
Data Router. Its Data Router will first show all lights on with no flashing, and then just the blue Power light will
remain on.
6.
Replace the EVSE’s cover. The network can now resume regular functions.
