State of the Art EVSE
User Manual
Model 3727-A02XX EVSE Gateway
Copyright EVSE LLC 2017. All rights reserved. Patents pending.
Page 17
Figure 5
Setting Up a ZigBee Mesh Network
Within a ZigBee Mesh network, a Gateway Module can interface with EVSEs containing ZigBee modules. When setting up a
network for the first time, you will need to add the EVSEs one at a time. These EVSEs will already have been installed at the
site. Before you begin, make sure the covers of the EVSEs have been removed as you will need access to their Data Router
dip switches. See that EVSE’s installation guide for those instructions. Refer to Figure 5 for the EVSE’s Data Router dip switch
location.
Note: Power must remain on for the Gateway Module and the EVSEs to ensure communication does not get interrupted
before the process completes.
1.
Turn on the Gateway Module.
2.
Turn on the first EVSE. This is usually the EVSE closest to the Gateway Module.
3.
Slide that EVSE’s Data Router Dip Switch number 3 to Closed to put it into ZigBee Setup Mode (Figure 5). After a few
moments, all the lights on the Data Router will begin flashing, letting you know the EVSE is now in ZigBee Setup
Mode.
Figure 6
4.
From the Main screen, select the ZigBee Setup dropdown menu and
choose Synch EVSEs. The following screen displays:
