EVS Synapse U4T100, Руководство по установке и настройке

Страница: 20 / 68

INSTALLATION AND CONFIGURATION MANUAL
U4T100-U4T140
18
R-GainA ~ R-GainD
R-Gain
controls the Red gain of the corresponding channel. The
control range is between 50% and 150%. The default setting is 100%.
G-GainA ~ G-GainD
G-Gain
controls the Green gain of each corresponding channel. The
control range is between 50% and 150%. The default setting is 100%.
B-GainA ~ B-GainD
B-Gain
controls the Blue gain of the corresponding channel. The
control range is between 50% and 150%. The default setting is 100%.
BlackA ~ BlackD
Black
controls the total R-G-B Black gain of each corresponding
channel. The control range is between –128bit and 127bit. The default
setting is 0bit.
R-BlackA ~ R-
BlackD
R-Black
controls the Red-Black of each corresponding channel .
The control range is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
G-BlackA ~ G-
BlackD
G-Black
controls the Green-Black of each corresponding. The
control range is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
B-BlackA ~ B-
BlackD
B-Black
controls the Blue-Black of each channel. The control range
is between –128bits and 127 bits in steps of 1 bit The
default setting is 0 bit.
EMBEDDER
Audio-Phase
A
If this setting is set to
Align
, the card ensures audio-phase alignment
between multiple audio channels and audio groups, which is
necessary for multi-channel (surround) purposes. If errors in the
signal-chain occur the de-embedder blocks reset synchronously to
maintain audio-phase-alignment.
If this setting is set to
Off
, the card eats-all audio including errors.
Even if there are DBN/ANC/ECC or channel-sequence errors, the de-
embedder will pass them. Be aware that audio-phase-alignment
between multiple audio channels and audio groups cannot be
maintained if this setting is set to
Off
.
Note: This setting can be helpful to solve problems in the field using
equipment which doesn’t follow the standards correctly.