EVS Synapse GED100, Руководство пользователя

Страница: 18 / 74

Phaser1-Offset The timing or offset of the autophaser of SDI Input 1 can be tuned with
Phaser1-Offset (see block schematic) between 0 and 4124px. Default is
0px.
The correct functioning of the autophaser can be checked using status-
items Phaser1_H_Pos and Phaser1_Stat. When Phaser1_Stat shows Safe,
the autophaser is working in its Safe-region. When Phaser1_Stat shows
Warning or Critical, the Phaser1_Offset setting can be used to tune the
autophaser into its Safe -region.
The autophaser is enabled when the Lock-Mode is set to Ref1 or Ref2
and when a Ref is present, shown by the status-item Ref-Format.
Phaser2-Offset The timing or offset of the autophaser of SDI Input 2 can be tuned with
Phaser2-Offset (see block schematic) between 0 and 4124px. Default is
0px.
Correct functioning of the autophaser can be checked using the
Phaser2_H_Pos and Phaser2_Stat status items. When Phaser2_Stat
shows Safe, the autophaser is working in its Safe-region. When Phaser2_
Stat shows Warning or Critical, the setting Phaser2_Offset can be used
to tune the autophaser into its Safe region.
The autophaser is enabled when the setting Lock-Mode is set to Ref1 or
Ref2 and when a Ref is present, shown by the Ref-Format status item.
Phaser-Status It is possible to display the function of the autophasers in the status
menu of the card. This setting enables or disables the status-items:
Phaser1_H_Pos, Phaser2_H_Pos, Phaser1_Stat and Phaser2_Stat. Default
setting is Off.
5.3. Delay
Setting Description
Delay-Bypass You can bypass the delay block entirely by setting this to on. By default it is switched
off.
Delay-mode_1 With this setting you decide whether the card should apply delay by means of time in
milliseconds (defined with Time-Delay_1) or to apply delay by means of frames, lines
and pixels (Fr-Ln-Px). Default is Fr-Ln-Px.
Time-Delay_1 This setting is only used when Delay-mode_1 is set to Time . It defines the delay that
should be applied to the video in milliseconds between 0 and 10000ms.
F-Delay_1 F-Delay sets the amount of delayed Frames. The available range is from 0 to 250
frames (dependent on the video format).When Out-Frmt is SD, the maximum is 250
frames, when it is 720p50/60 the maximum is 120 frames. All other HD formats can be
delayed a maximum of 60 frames.
10 | November 2021 | Issue 1.00.B