EVS Synapse GED100, Руководство пользователя

Страница: 36 / 74

Setting Description
#LocalOut_MD_Src With this setting you decide which of the metadata sources you want to use as
the metadata output on the I/O-panel in the above schematic. Can be the
metadata from the SDI input (SDI, default), from the Dolby E input (DecoderOut),
from the I/O-panel RJ45 metadata input (Local), or from the card’s internal
metadata generator (ShufflerOut).
#Shuffler_MD_Src With this setting you decide which of the metadata sources you want to use as
input of the Metadata Generator/Metadata Shuffler block in the above
schematic. You can select the SDI input, the Dolby decoder output (DecoderOut)
or the Local metadata input. Default is SDI.
MD-Control With this setting you decide whether you want to manually change the Metadata
presets, change MD presets via the GPI contacts or change it by metadata loss
detection (see setting #MetaLoss). A combination of GPI contact overrides with
metadata loss detection is also possible. GPI+LossDetect only works in non-
latch mode. Default is manual.
MD-LossDetect With this setting you can set a metadata source on which you want to perform
metadata loss detection. Can be the metadata on the SDI input, the metadata on
the Dolby E input (DecoderOut) or the metadata on the local RJ45 input. Default
is SDI. The actions taken when a metadata loss is detected by MD-LossDetect
can be set with the settings MetaLoss and MetaDet.
28 | November 2021 | Issue 1.00.B