EVS Synapse 2GF100/110, Руководство по установке и настройке

Страница: 17 / 53

EVS Broadcast Equipment SA
15
#CVBS-frmt
With this item you can set the format of the CVBS input. Possible
formats to select here are (default is
Auto
):

PAL-M

PAL-N

NTSC-M

NTSC-4.43

NTSC-J

SECAM

PAL-60

PAL-BGHID

Auto
(automatic detection and selection between NTSC-J and
PAL-BGHID)
#Out-Frmt
With
Out-Frmt
you can set what the output should be of channel
A as well as channel B. Possible settings are:

1080i60
(default),
1080i50

1080p30
,
1080p25
,
1080p24

720p60
,
720p50

SD525
,
SD625
#IO-Map
(GFS only)
With this setting you can select the 3Gb/s mapping in case the input
format is 1080p50 or 1080p60. Can be manually set to
Level A
or
Level B
. You can also choose to set it to
auto
, in which case the
GDL will automatically detect whether the input is Level A or
Level B.
#Out-Mode
With this setting you choose which input should be on which
output. There’s 4 modes are available:

Straight
(default): Channel A to outputs A1-A2, Channel
B to outputs B1-B2

Crossed
: Channel A to outputs B1-B2, Channel B to
outputs A1-A2

A Only
: Channel A to all outputs

B Only
: Channel B to all ouputs
Note:
When in ‘A only’ or ‘B only’ modes, you can process 16
channels of audio for the outputs. When in mixed modes you can
process only 8 channels of audio per input. Also when in ‘A only’
all the settings that involve video channel B are discarded and when
in ‘B only’ all channel A settings are discarded.
#Switch-Back
When this setting is set to
on
, the input selection will switch when
the active input is lost. Set to
off
will not switch the input on input
loss. Set to
once
, the switch will only be done once, and will not