Mp3 players, computers, video cameras, gaming consoles,
projectors, etc.
Connecting the EXO Xciter to conventional audio sources
is easily done with the EXO Cable
(Combo USB, USB Power,
3.5mm stereo jack)
.
For EXO Xciter accessories visit
www.exoxciter.com
Performance Specifications
Compliant with Bluetooth V2.1+EDR
Supported Bluetooth Profiles: HSP/HPF, SPP, OPP, PBAP, A2DP
and AVRCP
Operating Range: 10 meters
(Class 2, Bluetooth standard)
Max Peak Power: 5 watts RMS
Charging Time: 2 hours
Standby Time: Up to 1 month
Built-in Battery Charger
(charging by PC/Laptop USB connector
or AC Wall Charger compatible with USB port).
Frequency Range: 200 to 20kHz
Music Playing Time: 4 to 5 hours
(high volume level)
Precautions
• Carefully read the instructions and check the accessories
before use.
• Do not drop.
• Do not disassemble.
• Do not force EXO Xciter against a surface.
• Audio quality varies by surface application. Explore a
variety of surfaces to achieve best sound quality.
• Make sure the EXO Xciter Elastomeric disk on the bottom
is clean and makes good contact with surface.
• Turn off EXO Xciter when not in use.
8
9
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and,
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
