Evolve T-100-R, Руководство по эксплуатации

Страница: 4 / 15

Page 4
Setting the Heating or Cooling Temperature Setpoint
Operation Guide
64
DONE
HEATING SETPOINT
4:30
75
MENU
HEAT
MODE HOLD
64H
82C
AUTO
FAN
Sys Off
70
Done
Press a button to
go to the setpoint
change screen
Setpoint change screen
Press the up or down arrow buttons to
set the desired temperature setpoint
Raise Temperature
Lower Temperature
Pressing the up or
down buttons will
increment the setpoint
1 degree. Press and
hold the button to ramp
the setpoint.
Press “DONE” button to set the setpoint and
exit back to the main thermostat screen or
wait for the screen to automatically time out.
If the System Mode is OFF, pressing either the Up or Down buttons will take you to the
System Mode screen. You must first set an operating mode before you can set or change the
setpoint.
To change the Heat Setpoint you must be in the Heating mode, to change the Cool Setpoint
you must be in the Cooling mode. If you are in Auto mode, the mode of the last system call
will be the setpoint screen displayed.
Setpoint Push : Note that you cannot lower the cooling setpoint below the heating setpoint. The
thermostat will “push” the heating setpoint lower if you try to lower the cooling setpoint below the
heating setpoint. It maintains a 3 degree separation between the heating and cooling setpoint. The
same is true for raising the heating setpoint above the cooling setpoint. Again the thermostat will
“push” the cooling setpoint up to maintain the 3 degree separation.

