11
Protection:
If the power supply latches into shutdown stage (when over current, over
voltage or short circuit protection is working), the power supply shall return to
normal operation only after the fault has been removed and PS-ON is reset for a
minimum of 1 Second or by removing AC power cord and reconnect it.
Trouble Shooting:
If the system has no responses when user turns on the power supply, then
please follow the following instructions to check the problem.
A.
Ensure the power cord is connected tightly.
B.
Ensure all the connectors are connected in the right direction.
C.
Check whether there is any short-circuit problem, or defective
peripherals by unhooking each peripheral one at a time.
D.
Ensure the on/off switch is turn to the ON position.
E.
If one of the above-mentioned have occurred, please wait for 10- 30
seconds to release the power supply protect condition, then turn on the
power supply again.
F.
If the power supply still cannot work, please send it back to your vendor
or supplier for further analyzing and repairing.
WARNING:
•
Please do not open the power cover without any authorizations; it will
cause
thunder-stroke danger.
Note:
• Warranty void if the serial number sticker broken or removed.
• If you have any technical problem, please feel free to contact us. More
information on
www.evolve-europe.com
