background image

13

www.evolutionpowertools.com

FR

ES

EN

i) Check the operation of the lower guard 
spring. If the guard and the spring are not 
operating properly, they must be serviced 
before use. 
Lower guard may operate 
sluggishly due to damaged parts, gummy 
deposits, or a build-up of debris.
j) Lower guard may be retracted manually 
only for special cuts such as “plunge cuts” 
and “compound cuts.” 
Raise lower guard 
by retracting handle and as soon as blade 
enters the material, the lower guard must be 
released. For all other sawing, the lower guard 
should operate automatically.
k) Always observe that the lower 
guard is covering the blade before 
placing saw down on a bench or the floor. 
An unprotected, coasting blade will cause the 
saw to walk backwards, cutting whatever is in 
its path. Be aware of the time it takes for the 
blade to stop after switch is released.

(3.4) wArNING:

 If any parts are missing, do 

not operate your machine until the missing 
parts are replaced. Failure to follow this rule 
could result in serious personal injury. 

(4.1) GETTING STArTEd - uNPACKING

Caution: 

This packaging contains sharp 

objects. Take care when unpacking.  Remove 
the machine, together with the accessories 
supplied from the packaging. Check carefully 
to ensure that the machine is in good 
condition and account for all the accessories 
listed in this manual. Also make sure that all 
the accessories are complete.

If any parts are found to be missing, the 
machine and its accessories should be 
returned together in their original packaging 
to the retailer. 

Do not throw the packaging away; 
keep it safe throughout the guarantee 
period. Dispose of the packaging in an 
environmentally responsible manner.  
Recycle if possible. 

Do not let children play with empty plastic 
bags due to the risk of suffocation.

(4.2) ITEMS SuPPLIEd

description

Quantity

Instruction Manual 

1

Multipurpose Blade

1

Hex Key 8mm 
(Blade Change)

1

(4.3) AddITIONAL ACCESSOrIES

In addition to the standard items supplied 
with this machine the following accessories 
are also available from the Evolution online 
shop at www.evolutionpowertools.com 
or from your local retailer.

(4.4)

description

Part No

Multipurpose Blade

RAGE

355

Diamond Blade

DIAMOND

355

Содержание RAGE 2























Отзывы: