THE LASER CUTTING GUIDE
This machine is equipped with a Laser Cutting Guide. This
allows the operator to preview the path of the blade through
the workpiece. The ON/OFF switch for the Laser Guide is
positioned on the top of the motor housing.
(Fig 7)
Avoid direct eye contact with the laser beam, and do not use
on material that could reflect the laser beam.
WARNING:
Do not stare directly at the laser beam. A hazard
may exist if you deliberately stare into the beam. Observe all of
the following safety rules.
• The laser beam must not be deliberately aimed at personnel
and must be prevented from being directed towards the
eyes of a person.
• Always ensure that the laser beam is used only on
workpieces that have non-reflective surfaces, i.e natural
wood or matt surfaces etc.
• Never exchange the laser module assembly for a different
type or class of laser.
• Repairs to the laser module must only be conducted by
Evolution Power Tools or their authorized agent.
LASER ADJUSTMENT
WARNING: At no time during this adjustment procedure
should the motor be started.
To check laser alignment:
• Secure (with masking or sellotape) a piece of cardboard, or
similar, onto the rotary table of the machine.
• With the sliding carriage in the rearmost position, lower the
Cutting Head so that a blade tooth makes an indentation
mark in the cardboard.
• Allow the Cutting Head to rise, and then repeat the above
with the sliding carriage in an approximate mid- way
position. Again repeat, but with the sliding carriage moved
to its most forward position.
• With the Cutting Head raised, turn on the laser and slide
the Cutting Head backwards and forwards to observe the
projected laser beam and how it relates to the three (3)
indentations made by the saw teeth in the cardboard:
• Projected Laser Beam is in alignment with the three
indentations =
No further action required.
Fig. 7
15
www.evolutionpowertools.com
EN
