Evolution Fury 3-XL, Оригинальное руководство пользователя, Страница: 17 / 60

17 www.evolutionfury.com
ensure that there is no movement.
4. When cutting is complete re-adjust the depth stop so that
the cutting head can be locked in the down position by the
head latching pin.
10. Cutting Bowed Material
Before cutting any workpiece, check to see if it is bowed.
If it is bowed the workpiece must be positioned and cut as
shown. See
Figs 11 & 12
Do not position the workpiece incorrectly or cut the
workpiece without the support of the fence.
11. Clearing Jammed Material
1. Turn mitre saw “OFF” by releasing the trigger switch.
2. Allow the blade to come to a complete halt.
3. Unplug the mitre saw from the mains supply.
4. Remove any jammed material from the unit.
12. Transporting
When transporting the saw between locations make sure that:
1. The saw head is locked in the down position.
2. The rotary table mitre handle, the bevel locking lever and
the slide locking knob are all securely tightened.
3. The machines power cord is safely stored.
4. Use the transportation handle cut-outs on either side of
the machine base to lift the saw. Do not lift the saw by the
switch handle alone.
NOTE:
Although compact this saw is quite heavy, Enlist
competent help, if necessary, when transporting this saw.
Fig 11
Fig 12