Evolution Dog wash, Руководство пользователя

Страница: 33 / 60

Evolution Dog Wash Owners/Operators Manual Page 33
5.2.4 Thermostatic Water Mixing Valve
The EVOLUTION water temperature is maintained by
providing hot water to the unit or installing the optional
water heater. The water temperature is maintained with
a Thermostatic Water Mixing Valve. The water
temperature is set to 73 degrees coming from the factory,
this is what the water temperature will be at the nozzle
providing adequate hot water is supplied to the unit. This
temperature can be
adjusted at the
mixing valve.
To adjust the preset water temperature on the EVOLUTION follows these steps:
1. Loosen the locking screw by backing out approx. 1/2 inch.
2. Pull the adjusting knob out towards the front of the unit.
3. Turn the EVOLUTION on using the operator’s key, select rinse, press nozzle button.
4. Turn the adjusting knob counterclockwise while feeling the water coming from nozzle.
7
5. Once you are satisfied with the water temperature, reverse the steps above.
5.2.5 Water Pressure Regulator
The Water Pressure Regulator is located on the Water Manifold and is used to restrict the flow
of water through the system to protect the animals being washed. The recommended incoming
water pressure should be Min. 20 PSI – Max. 60 PSI.
The Acme EB35 ½ Pressure Reducing Valve (Water Regulator) is
preset from the factory at 45 PSI. 8
7 Typically water that is comfortable to humans is too hot for animals, do not make water too warm.
8 Caution should be used when adjusting this valve not to exceed a pressure greater than the animal can tolerate.
Locking Screw
Adjusting Knob
Water Manifold
Press Regulator
Shut Off Valve
Thermostatic Valve