Evolution A15TS, Инструкция по установке и эксплуатации

Страница: 7 / 12

5
5. Timer
The time switch is a 24-hour timer for controlling the chlorinator and associated
circulation pump on/off times.
Setting the Timer
To set the time, turn the minute hand clockwise until the time of day is set on the Inner
Dial. For example, to adjust the time to 8:00pm, adjust the Timer as per
Fig 4 . The Outer
Dial has 24-hour markings with 15-minute increments to match the Inner Dial time at
the Activation Point.
It is important to ensure that if the time is set to 8.00pm, the Activation Point on the
Outer Dial will align with 20, not 8, which would be 8.00am.
Program the Timer by pushing the captive trippers to the outer position for the entire
period that the chlorinator and pump are to be turned “ON”. Each tripper corresponds
to 15 minutes on the 24-hour dial. When the tripper is pushed inwards, the Timer is in
the “OFF” position.
Inner Dial
Outer Dial
Minute Hand
One tripper equates
to 15 minutes
Activation Point
Fig. 4
6. Circuit Breaker
The circuit breaker mounted on the front right-hand side of the Evochlor Chlorinator is
designed to trip out in the event of a power surge or overload. When tripped, the yellow
centre button will pop out, shutting down the unit. To reset, press the yellow centre
button back in to resume normal function.
Note: Turn off the chlorinator at the power point before attempting to reset the
circuit breaker. Should the circuit breaker continue to trip, then a local Evolution
distributor should be contacted.
7. Switch
This switch allows you to choose the timer operation mode for the chlorinator and pool
pump. The
Timer selection to the left enables the chlorinator and pool pump to turn
on and off at the designated timer settings. The Manual selection to the right allows
the chlorinator and pump to work continuously until the switch setting is physically
changed. The
Off position in the middle will turn power off to the chlorinator and
circulation pump.