5
www.evolutionpowertools.com
EN
(1.10)
INTENDED USE OF
THIS POWER TOOL
WARNING:
This product is a Compound
Mitre Saw and has been designed to be used
with special
Evolution
blades. Only use
accessories designed for use in this machine
and/or those recommended specifically by
Evolution Power Tools Ltd.
WHEN FITTED WITH A CORRECT
BLADE THIS MACHINE CAN BE
USED TO CUT:
• Wood, Wood derived products
(MDF, Chipboard, Plywood, Blockboard,
Hardboard etc),
• Wood with nails,
• 50mm mild steel box section with 4mm
wall at HB 200-220,
• 6mm mild steel plate at HB 200-220.
Note:
Wood containing non galvanised nails
or screws, with care, can be safely cut.
Note:
Not recommended for cutting
galvanised materials or wood with embedded
galvanised nails. For cutting stainless steel
we recommend Evolution dedicated stainless
steel blades.
Cutting galvanised steel may reduce
blade life
.
(1.11)
PROHIBITED USE OF
THIS POWER TOOL
WARNING:
This product is a Compound Mitre
Saw and must only be used as such. It must not be
modified in any way, or used to power any other
equipment or drive any other accessories other
than those mentioned in this Instruction Manual.
(1.13)
WARNING:
Do not allow persons
unfamiliar with the machine or these
instructions to operate the machine.
Machines are dangerous in the hands
of untrained users. Children should be
supervised to ensure that they do not have
access to, and are not allowed to play with,
this machine.
Children should be supervised to ensure
that they do not have access to, and are
not allowed to play with, this machine.
SAFETY PRECAUTIONS
(2.1)
POWER TOOL GENERAL
SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and
instructions.
Failure to follow the warnings
and instructions may result in electric shock,
fire and/ or serious injury.
Note:
This power tool should not be powered
on continuously for a long time.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
(2.2)
1) General Power Tool Safety Warnings
[Work area safety]
a)
Do not use this machine in an
enclosed room.
(2.3)
2) General Power Tool Safety Warnings
[Electrical Safety]
a)
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
b)
Use a clean, dry workbench if available.
For added protection use a residual current
device (R.C.D.) that will interrupt the supply
if the leakage current to earth exceeds 30mA
for 30ms. Always check the operation of the
residual current device (R.C.D.) before using
the machine.
(2.4)
3) General Power Tool Safety Warnings
[Personal Safety].
a)
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power
tools may result in serious personal injury.
b)
When cutting metal, gloves should be worn
before handling to prevent from getting burnt
from hot metal.
(2.5)
4) General Power Tool Safety Warnings
[Power tool use and care].
a)
Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of moving parts and any other
condition that may affect the power tools