Evolution Aqua K1 MICRO BEAD 20, Инструкция по установке и эксплуатации, Страница: 17 / 24

17
HOW TO GET THE BEST FROM YOUR K1 MICRO BEAD FILTER
The biological side of the filter can take anywhere between 4 to 8 weeks to fully mature.
To speed up this process, add the award winning PURE
POND to the filter.
Top tips for optimum biological performance:
• For best results for the prevention of green water use an evoUV pond clarifier.
A UV-C is recommended on every pond installation.
• Maintain a stable pond pH of 7 or higher.
• Maintain a pond Nitrate reading of 50mg/l or less.
• Always dechlorinate your mains water. Use an Evolution Aqua Dechlorinator for
removal of harmful chlorine when topping up with mains water.
• Add PURE POND to the filter media inside the K1 Micro Bead Filter.
• Feed your fish Evolution Aqua’s own food range which has been designed to create
less fish waste.
Ask your local EA dealer for advice.
QUICK CLEANING / BACKWASH INSTRUCTIONS
PUMP OFF
RINSE
AND BLOWER
FOR 2 MINUTES
RINSE
AND PUMP
UNTIL CLEAR
BACKWASH
AND PUMP
UNTIL CLEAR
RINSE
AND PUMP
UNTIL CLEAR
FILTER
AND PUMP
• Switch PUMP OFF.
• Turn the ball valve to OPEN.
• Turn the MPV to the RINSE position.
• Switch the AIR BLOWER ON for 2 minutes.
• After 2 minutes switch the AIR BLOWER OFF.
• Turn the ball valve to CLOSE.
• Leave the MPV in the RINSE position, switch the WATER PUMP ON.
• When water runs clear through the sight glass, switch the WATER PUMP OFF.
• Turn the MPV to the BACKWASH position.
• Switch the WATER PUMP ON.
• When water runs clear through the sight glass, switch the pump WATER PUMP OFF.
• Move the MPV to the RINSE position.
• Switch the WATER PUMP ON.
• When water is running clear, switch off the WATER PUMP OFF.
• Move the MPV to the FILTER position.
• Switch the WATER PUMP ON.
• The filter is now clean and fully operational.
Do not operate the multi-port valve with the circulating pump switched on.
The ball valve must be closed when the circulating pump is running.