Evolution Aqua K1 MICRO BEAD 20, Инструкция по установке и эксплуатации, Страница: 14 / 24

14
REMOVING AND FITTING THE LID
K1 MICRO BEAD FILTER SET-UP
Carefully undo the M8 size
nuts and washers holding the
lid collar in place.
With the lid off, familiarise
yourself with the internals of
the filter.
Re-fit the nuts and washers
around the lid and hand
tighten the nuts.
Then tighten alternate nuts
with a spanner in sequence
i.e. at 12 ‘o’ clock and
6 ‘o’ clock then 1 ‘o’ clock
and 7 ‘o’ clock. Tighten to a
reasonable degree. DO NOT
OVER TIGHTEN.
Fit the plastic caps over the
top of the nuts to protect the
threads and nuts.
Carefully lift the collar off
the threads.
For your size of filter, you
should add the recommended
amount of K1 Micro straight
into the filter.
Remove the clear plastic lid.
Refit the clear plastic lid
and the collar.