Infinium 12 000 RGB FB4 User Manual Ver. 1.00
Page 13
Installation
o
Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any
harming deformation.
IMPORTANT!OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working load limits, installation material
being used, and periodic safety inspection of all installation material and the projector. If you lack these qualifications, do not attempt
the installation yourself, but instead use a professional structural rigger. Improper installation can result in bodily injury and or damage
to property. The projector had to be installed out of the reach of people
Always secure your fixture with a safety cable !
This backlighted LCD display indicates the fixture is DMX addressed, the fixture status, set up values ..etc
NO.
Name
Function
1
Laser aperture
Laser output, do not look directly into this aperture
2
DB25 output
Output signal of FB4. Can link to another laser and have same graphics.
3
Function knob
For X Y moving, invert & size; R, G, B brightness adjustment
4
FB4 control hardware
FB4 screen control board, support Pangolin Quickshow Software
5
ILDA in & out
ILDA interface for laser control software
6
3-Pin Interlock
Laser output is available only when the interlock is connected.
It could be used to connect a laser emergency switch.
7
DMX in & out
DMX to control FB4 programs.
8
Power ON/OFF
9
Safety failure switch
Turn this switch ON to have one beam protective control. Turn OFF to
Содержание Infinium 12000 RGB FB4
Страница 1: ...12 000 RGB FB4 User manual Mode d emploi...