evoheat H15A, Инструкция по установке и эксплуатации, Страница: 20 / 32

18
4 Error Interface
Usage
Error Code
Note:
On the Error Interface, short press "ON/OFF", back to the main interface, and short press
"UP" or "DOWN" to display multiple errors.
On the main interface, short press "ON/OFF" to back to the Error Interface. For 10
seconds without operation, automatically back to the Error Interface.
1 ） .
2).
4.1 Interface
Error No.
Error Quantiy
19
Usage
We can use Error Code to find the cause and the solution.
Protection/Error
Error Code
Standby
Normal Startup
Inlet Temperature Error
Outlet Temperature Error
Ambient Temperature
Suction Temperature Error
Discharge Temperature Error
Low Pressure Sensor Erro
High Pressure Sensor Erro
High Pressure Protection
Low Pressure Protection
Flow Switch Protection
Winter Def Protection I
Winter Def Protection II
Def Protection
Dischange High Temperature Protection
Pump Working Environment Protection
AC Input low voltage protection
AC Input over-current protection shutdown
AC Input over-current protection alarm
None
P01
P02
P04
P07
P08
PP1
PP2
E01
E02
E03
E19
E20
E07
P81
E44
E21
E22
E23 （ blank ）
5 Electronic Control Error Table
None
DC bus over-voltage protection
DC bus low-voltage protection
IPM over-current protection
IPM overheating protection
Radiator temperature sensor error
Power component overheating protection shutdown
Power component overheating protection alarm
IPM current sampling
Compressor over-current protection shutdown
Compressor over-current protection alarm
Input voltage phase
Compressor start-up error
Communication error between DSP and communication board
Communication error between DSP with PFC
Input voltage sampling
EEPROM Error
Compressor weak magnetic protection
PFC Error
Communication error between drive and main board
Communication error between main board and wired controller
E08
EE 8
E45
E41
E40
E39
E38
E37
E36
E35
E34 （ blank ）
E33
E32
E31 （ blank ）
E30
E29
E28
E27
E25
E24