evoheat H15A, Инструкция по установке и эксплуатации, Страница: 17 / 32

14
Usage
3.Usage Of Wire Controller
3.1 Startup & Shutdown
Note: the Startup & Shutdown operation can only be performed in the main interface.
1
enter the Startup
interface
Long press for
second to
For 1 minute without
operation, screen out
Short press any key,
back to the Startup
interface
3.2 Mode
In the main interface, long press for " " 1 second, to switch between the cooling
and heating modes.
Cooling Interface
Heating Interface
Note: 1) Without Thermostat, wired controller can be used for Startup & Shutdown;
2) With Thermostat, wired controller can only be used for Shutdown, and cannot
be used for Startup;
3) When using the remote control, wired controller is shown as below:
Startup Interface
Shutdown Interface
Def Interface
(heating mode only)
1
enter the Shutdown
interface
Long press for
second to
15
Usage
Set temperature flashing
Note: In the temperature setting interface, for 20 seconds without operation, the system
will automatically record the setting, and back to the main interface.
Note: In the query parameter interface, it cannot automatically back to the main interface.
3.3 Temperature
Short press or to
enter thetemperature
setting interface
Short press , back
and save
3.4 State parameter query
Short press ,
to enter the Query interface;
Short press