evoheat ALLHT1170R134, Руководство по установке, Страница: 9 / 36

6
3.2
Outline Dimensional Drawing
3.Specification
Air-out direction
Installation
Bottom Outlet
Water outlet
DN80 flange
Electrical control box
4- Φ 16
2
0
3
0
2180
900 900
1
0
8
0
1
0
2
0
4
0
0
1
7
5
530
Water inlet
DN80 flange
Models:
ALLHT1170R134
7
4.Unit Function Description
The unit absorb energy from outside and release the heat according to the heat
exchanger, if the environment temperature is low, the heating capacity will be
attenuation.
Heating capacity
3 minutes protection
When the unit stop, if you restart the unit or turn on the manual switch, the unit will not run
in 3 minutes, it's the protection for the compressor.
If the environment temperature is too high, the unit will stop running to protect the
compressor.
Defrosting
Under the heating mode, the unit will defrost automatic to make sure the heating
efficiency (it will last 2-10 minutes).
Working condition
In order to use the unit correctly, please run the unit at environment temperature -7
℃
-43.
The unit includes sophisticated electronic devices, prohibited to use water from lake,
untreated river water and groundwater!
Power off
If the power supply is off, the unit will stop running. If the running unit is disturbed by
lightning, car radio, power grid fluctuations please cut off the manual power switch , and
then power on, press the on / off button.
leakage current protection
There is a leakage current action protection comes with the power supply wire.
Electric heating protection
When the water temperature reach 94
℃
, electric heating fuse will melt off (can not be
restored).
Hight pressure protection