04-2017 5325 00
33
bEvEragEs
The currently-used selections are dis-
played; available selections and selections
that are not compatible with the used con-
figuration (layout) but are compatible with
other configurations (layouts).
From the screen, it is possible to:
-Create new drinks and associate a recipe
.
The software checks that there is compat-
ibility between the recipe and appliance
configuration (layout).
If is displayed, it means that an incom-
patibility has been detected.
-Delete a beverage .
-Duplicate and customise a beverage.
crEatiNg
or
moDifyiNg
a
bEvEragE
It is possible to:
-Assign/ modify the name of beverages
displayed during normal operation.
-Select which recipe to use when preparing
the beverage.
The software checks that there is compat-
ibility between the recipe and the configu-
ration (layout) used by the appliance.
If is displayed, it means that an incom-
patibility has been detected.
-To change the image associated with the
beverage, touch the image to choose a
new image.
-Enable the option to prematurely stop a
selection (“stop dispensing” function).
When a beverage is being dispensed, a
button will be displayed which stops the
preparation when pressed.
-Associate a multimedia content
playlist
to
be displayed whilst dispensing.
-Dispense a test beverage.
rEcipEs
The currently-used recipes are displayed;
available recipes and recipes that are not
compatible with the used configuration
(layout) but are compatible with other con-
figurations (layouts).
It is possible to:
-Create a new recipe .
The newly created recipe is saved in the
“not available” category.
Then, associate the recipe to the bever-
age.
The software checks that there is compat-
ibility between the recipe and the configu-
ration (layout) used by the appliance.
If is displayed, it means that an incom-
patibility has been detected
-Delete a recipe .
-Duplicate and customise a recipe.
crEatiNg
a
NEw
rEcipE
The guided procedure allows a new recipe
to be created.
A screen is displayed where:
-A name can be assigned to the new reci-
pe.
-Set a wait time (in seconds) for the “Take
beverage” message to appear when the
beverage has been dispensed.
The wait time allows the hoses to be emp-
tied and drip into the cup.
-Tap and then “Add preparation” to add
the products which make up the recipe
(e.g. coffee, chocolate, etc.).
The parameter screens vary according to
the added product (espresso coffee, fresh
brew coffee, instant powders, etc.).
-To customise the beverage, tap and
then “Add customisation”.
For every customisation option, the vari-
ous parameters can be set.
-Save the settings and return to the main
screen.
-Dispense a test beverage.
