EVOC LNB-1406, Руководство пользователя

Страница: 144 / 148

Chapter 4 BIOS Setup
- 64 - JNB-1406
List of Error Codes
When turning on the computer, if one of the following error codes or messages is
displayed, follow the instructions shown below. If the problem persists, or if the error
code or message displayed is not shown here, contact Technical Support.
Error Code/Message Action
Reboot and Select
Proper Boot Device or
Insert Boot Media in
Select Boot Device and
press a key
(No OS system is
detected)
The booting operating system in hard disk is wrongly
installed.
 If the computer cannot be booted from the hard
disk, make sure whether the hard disk has been
correctly identified within the Setup menu.
 If the hard disk has already been identified,
perform the reinstallation procedure. Otherwise,
please contact Technical Support.
Boot Setup Utility
1. Reboot the computer.
2. Press DEL, when the booting interface appears during rebooting.
Dealing with Problems:
When a problem occurs, refer to this page.
If the problems still cannot be solved, contact Technical Support.
Boot
The power status
indicator or battery
status indicator is
not lit  Check the cable connection for the AC adapter.
 Check if a fully charged battery is properly installed.
 Disconnect the AC adapter and remove the battery pack,
then connect them again.