EVOC IPC-820, Руководство пользователя

Страница: 57 / 69

Assembly and Maintenance
IPC-820 - 19 -
Item Description Item Description Item Description
1 Clip bar bracket 2 Guide rail bar 3 Motherboard puller
4 Motherboard 5
2X rubber spring pad
6 Motherboard puller
7 7X M3*6 screw 8 Puller bracket 9 Guide rail bar
10 Binding strip 11
4X cup head M4*6
screws with external
teeth lock washers
12 IO bracket
13 Carrier board 14
M3*8 screws with
washers (as the case
may require)
15
Copper hexagon
screw (as the case
may require)
Installing EPE motherboard:
1. According to the number of mounting holes of the carrier board, use same number
of copper hexagon screws CH-M3-8-5-Ni and lock them on the corresponding
self-clinching bolts of the chassis;
2. Place the carrier board to be installed on the copper bolts, align the position of
holes, and use proper number of M3*8 screws with washers to fasten the carrier
board;
3. According to the slot position of the carrier board, use M3X6 screws to install the
four guide rail bars and puller bracket respectively on the IO bracket and clip bar
bracket corresponding to the left/right slots of the motherboard, as shown in the above
figure;
4. By the corresponding slot and along the guide rail bars, gently insert the
motherboard on the carrier board, use two M3X6 screws to fasten the bracket of the
motherboard and CPU backplane bracket respectively onto the IO bracket and clip bar