Assembly and Maintenance
ERC-1005
- 23 -
5.5 Installing the Wall-mounted Bar
1
、
Use two countersunk head screws of the corresponding specification to fix
the left mounting bracket with the chassis; refer to the figure for its position;
2
、
Use two countersunk head screws of the corresponding specification to fix
the left bracket with the chassis; refer to the figure for its position;
3
、
Apply a gasket between the supporting arm of the movable bracket and the
chassis; fix the supporting arm of the movable bracket on the chassis with
corresponding truss head screws (apply a gasket, as shown in the above
figure)
4
、
Apply a gasket between the supporting arm of the movable bracket and the
guide rail for the left movable bracket; fix the supporting arm of the
movable bracket and the guide rail for the left movable bracket with
corresponding truss head screws (apply a gasket), as shown in the above
figure;
5
、
Install the mounting bracket on the right side of the chassis, the right
bracket, the guide rail for the right movable bracket and the supporting arm
of the right movable bracket in the same way;
6
、
Use three countersunk head screws of the corresponding specification to fix
the guide rail for the left/right movable bracket with the movable tray;
7
、
Fasten the captive screws on the left/right mounting bracket, so as to fix the
mounting brackets with the movable bracket.
Gaskets
Gaskets
Gaskets
Left bracket
Left mounting bracket
Movable
tray
Guide rail for the
left movable bracket
Supporting arm of
the movable bracket
