Appendix
· 56 ·
EIC-3011
devices (e.g. keyboard controller).
Cold Reset
Cold Reset is a boot sequence. When the PC is powered on, it is to be booted up. In
eset sequence, the system usually executes a couple of basic hardware
Mod le
LC, programming device or plug-in unit. These modules can be
e, it is
recommended to use module bracket for this type of module. There are also short,
act modules on the market. Module bracket is not designed for these
Warm Reset
e computer after the program is interrupted. Load and reboot the operating
Drivers
art of operating system. They modify user program data according to
configuration is a RAID1 system with SATA RAID controller
the cold r
checks, then load the operating system from hard drive to working memory -> boot.
u
Modules refer to P
local modules, expansion modules, interfaces or mass storage (mass storage module).
Module Bracket
Module bracket is used to fix the module and ensure safe contact and transportation.
Impact and vibration especially affects large and heavy modules. Therefor
light and comp
modules, because standard fixing measures are sufficient for them.
Reboot th
system again. Hot key CTRL+ ALT+ DEL can be used to execute warm reset.
Program p
specific format required by I/O devices (e.g. hard drive, printer and monitor).
Hotswap
SATA interface provides hotswap function for hard drive system of the device. The
prerequisite of the
(onboard or slot module) and at least two SATA detachable supports. The advantage
of hotswap is that faulty hard drive can be replaced without having to reboot the PC.
