Product Introduction
EC3-1820V2NA
· 5 ·
Note: USB3.0 is disabled by default. Before Intel USB3.0 driver is installed, it
can only be used as USB2.0 port. If USB3.0 driver is not installed after enabling
USB3.0 function, all the USB ports of Windows7 system (including other
USB2.0 ports) cannot be used. Windows8/8.1 will automatically load the driver.
The following steps are about enabling USB3.0 under Windows7 system:
1. Set the motherboard BIOS to default value, then install Windows7, place the
enclosed driver CD into the USB optical drive, and enter into the driver CD to
copy the folder USB3.0 under the Driver directory onto the desk;
2. Reboot the PC, press F2 to enter into BIOS, select “Advanced”- set “EHCI
Controller” to “Disabled”, and set “XHCI Controller” to “Enabled”, press “F10”
to save and exit;
3. Reboot and enter into Windows7 system, use PS2 mouse to double click
USB3.0 folder on the desk, double click “Setup.exe” to install the USB3.0 driver.
After the installation is finished, all the USB ports can be normally used. At this
time, USB3.0 ports have reached the USB3.0 standard.
1 x PS/2 keyboard/mouse port;
1 x 16-channel digital I/O port;
2 x Mini PCIE slot (MPCIE1 and J2, J2 optional), supporting WiFi; MPCIE1
supports 3G module;
1 x Micro SD card slot;
1 x HDMI port and 1 x VGA port;
2 x 1000Mbps LAN port.
Note:
How to identify alarms
1. A long beep means a system memory error;
2. A short beep means bootup.
